Manufacture of Performance H2 Parts [Archive] - Hummer H2 Forum: H2 forums

Manufacture of Performance H2 Parts

BreathlessPerformance.com
05-06-2003, 02:03 PM
We would like to invite all the members to visit our online catalog on our website for some cool performance and custom fabricated parts. We have been manufacturing performance products for Corvettes for over 8 years and have now devoted our company resources to doing the same for the H2 hummers. All our products are tested in our research and development dept then taken on the road with our two race teams for further testing. Our products can be bought direct from us or through our network of over 300 dealers and wholesale distributers.

If anyone would also like a printed catalog please e-mail us your address.

Thank you, Ernie
BreathlessPerformance.com

H2Bill
05-06-2003, 03:14 PM
Hi Ernie,
On your web site you show the Carbon Fiber Heat & Pressure Extractor Hood Grill and pictures of the installation. What did you use to cut the opening and does it come with a template to mark the area to cut? Thanks, Bill

BreathlessPerformance.com
05-07-2003, 10:13 AM
You can use a jig saw to cut the plastic opening. There is a notch on the hood already just follow that line. You can see it in the picture.

Thank you, Ernie
BreathlessPerformance.com

H2Bill
05-07-2003, 01:45 PM
Did you cut it from the inside of the hood or the outside? Will the stock handles work with the Hood Grill? Do you offer them painted (the black part, not the carbon fiber) to match my yellow? Thanks for the information.

BreathlessPerformance.com
05-07-2003, 02:53 PM
We cut it from the outside and takes about 5 min. The stock handles will fit our hood. We offer the hood painted in black or we can sell you the hood not painted and you can have it done there.

Thank You, Ernie
BreathlessPerformance.com

BreathlessPerformance.com
06-12-2003, 10:13 AM
We have our new free catalog done for the H2 if anyone is interested please drop us an e-mail with your address.

Thank you, Ernie
BreathlessPerformance.com
[email protected]

H2Bill
06-12-2003, 11:06 AM
Thanks Ernie! You've got mail!