|
mister usa 11-04-2003, 12:16 PM I've had some of the underbody coating flake off on my new H2. The local dealership has told me that the underbody coating material is not available anywhere in the states due to a hold up in importing from Canada GM due to some environmental concerns (HAZMAT?) Anybody else have a similar experience. Right now, the body shop has applied a temporary coating while they (I) wait. :banghead FlyGirl 11-13-2003, 11:56 AM Hi USA. We had the additional undercoat spray done on our new H2 (2 months ago) and haven't seen any indication of flaking. How long have you had your vehicle? It's hard to believe GM hasn't deemed this stuff tried and true - you'd think they'd have tested it well on their other SUV models?? Will keep an eye on ours and keep ya posted. FlyGirl Victoria, BC Canada bowtiebandit 11-16-2003, 09:43 AM Undercoating Peeling Off Frame (Clean Frame and Reapply Coating) #03-08-61-001 - (08/18/2003) Undercoating Peeling Off Frame (Clean Frame and Reapply Coating) 2003 HUMMER H2 Condition Some customers may comment that the undercoating on the frame is coming off. Cause The coating may be applied too thick in some areas and is peeling off. Correction Clean and reapply coating. Using a putty knife, scrape off all loose or flaking undercoating/wax. The surface should be clean. If the area of the frame has rusted, remove the rust with metal prep and a ScotchBrite™ pad. Let the frame air dry before applying the coating. Apply an even coat of Anti-Corrosion Coating, P/N 12346501, to the damaged area. Parts Information Part Number Description Qty 12346501 Coating, Anti-Corrosion 1 can mister usa 11-18-2003, 07:05 PM Thanks for the info. I'll keep checking with the dealer and pass along the reference part numbers LVS 12-09-2003, 02:50 PM I was told by my dealer I could NOT get any undercoating/rust proofing/paint sealer, and that if I did it would void my warranty. Is this just B.S.? Sounds like some dealers offer it. If you did not have it done at a dealer, who do you recommend for this? mister usa 12-11-2003, 11:38 AM Just a few weeks ago, the dealership was able to complete the underbody repair. What ever material is applied to the frame at the factory, when the vehicle is delivered is what they repaired. Initially a temp coating was applied, and now the final undercoating has been applied. It was covered by warranty, so I can't imagine there would be a problem. This was not an aftermarket product. | ||